Epoxy Flooring Services

Snapshot of Our Epoxy Flooring Services

• Small and Large-scale Thin-mil Decorative & Dust Control Applications
• Medium-mil & Self-leveling Applications
• 1/4-inch Trowel-down Remediation Applications
• Color Quartz & Color Flake Decorative Applications
• Secondary Containment
• Extreme Corrosion Control
• Provide Off-hours and Weekend Crews

We understand and respect the importance of providing our services at times that are convenient and necessary to you. Therefore, we provide crews on off-hours and weekends so our work will not interfere with your normal day-to-day operations.

Surface Preparation

It is critically important that concrete be prepared using the proper following methodology:

• Chemical Removal of Previously-coated Substrates
• Wet Prep and Etching with Water Blasting
• Shot Blasting (closed-circuit)

After initial surface preparation, all cracks, divots, and spalls shall be bridged and faired with either cementatious and/or epoxy filling materials.

Systems

• Thin-mil – primarily used in light manufacturing and warehousing environments that see moderate forklift and/or pallet jack traffic, as well as areas needing dust-control and good housekeeping.
• Medium-mil & Self-leveling – primarily used on floors that are 30 years old or more and are worn to a point where a heavier coating is required to provide a new, long-lasting wearing surface.
• 1/4 Trowel-down Remediation – needed for severely deteriorated concrete caused by a harsh manufacturing environment such as acid and/or chemical spills or extremely heavy traffic.
• Color Quartz and Color Flake – Typically used in highly-decorative and aesthetic areas such as office lobbies, laboratories, atriums, high-end food preparation areas, locker rooms, lunchrooms, etc.
• Secondary Containment Lining – used vertically on interior walls and floors as a containment overflow barrier in areas around tank vessels housing corrosive chemicals such as hydrofluoric acid, sulphuric acid, acetone, bromine, chlorine, etc.
• Extreme Corrosion Control – usually a one-off, design-specific application to provide extreme and total corrosion control in and around highly-destructive manufacturing processes. This system can range from FRP, stainless steel, glass and metal flake, etc.

Typical Floor Application

(as shown) (mouse over image)	a) After Preparation b) Begin Flaking after Coating	After Flaking and Flood Coating

ALPINE PAINTING & RESTORATION SERVICES
P O Box 216 • Chalfont, PA 18914 • (215) 348-4410 • Fax (215) 348-1195
Email: